+ Reply to Thread
Results 1 to 10 of 43

Thread: LaMotte ColorQ Water Tester

Hybrid View

  1. #1
    Join Date
    Mar 2006
    Location
    Downingtown, PA
    Posts
    27

    Smile Re: LaMotte ColorQ Water Tester

    Quote Originally Posted by MikeInMo View Post
    Please add me to the list as well anxiously waiting to hear on how well these work.

    I was too late to get Ben's kit last year and was planning on getting a good drop kit, (probably the kit offered at troublefree.com), but with the number of tests included in the colorq with somewhat reasonable refill prices...
    But who am I kidding, it's the GEEK factor that has me looking at this.

    All I currently have is the Walmart 6-way and am quickly running out of my CYA test so I need to replace the kit soon.

    Last question....Where can you buy the Colorq? I've only seen 1 place and he's posted that he's backordered for 2-3 weeks...any other ideas where it can be purchased?

    Thanks,
    Mike
    Checkout lamotte.com web site (the manufacturer). The ColorQ is listed in the pool testing section under new products.

    As for the GEEK factor-I too suffer. I have been very happy with the tester. It comes with 140 individual tests (except CYA which was 50 pills that you crush), which should last you the pool season. I bought a kit refill for $45 since I knew I would be testing 2x per day for a while until I get some history on using chlorox daily adds (just shifted this year). The tester uses liquid reagents (5 drops)(CYA uses a pill you crush) in a 5ml test tube that you insert into the tester, so the cleanup is very quick. The tester reads out in two decimal places-although I doubt if it really is that accurate. Also chlorine goes up to 10ppm. Comes in a nice travel kit. Actual electronic tester is about the size of your hand and uses a regular 9v battery
    Last edited by donaldm823; 06-15-2007 at 10:31 AM.
    Don
    30,000 gal concrete pool -- Autopilot SWG
    Using BBB for chemistry -- Using LaMotte ColorQ for testing

  2. #2
    salinda is offline Lifetime Member Weir Watcher salinda 0
    Join Date
    Dec 2004
    Location
    San Jose, CA
    Posts
    130

    Default Re: LaMotte ColorQ Water Tester

    Don,

    Where did you get it? LaMotte told me to order from a local pool supply store (they all carry Taylor though) or from AskAlanAQuestion.com.
    Salinda
    owner of ~35,000 gallon plaster IG pool/spa combo. Ikeric Dyna-Miser VS150 filter pump, 2 hp whisperflo spa jet pump, The Pool Cleaner 2x suction cleaner, Clean & Clear Plus 520 cartridge filter, Zodiac Clearwater LM2-40 SWG, Sta-rite 400k heater, solar heat pads and coils.

  3. #3
    MikeInMo is offline ** No working email address ** MikeInMo 0
    Join Date
    Oct 2004
    Location
    .
    Posts
    15

    Exclamation Re: LaMotte ColorQ Water Tester

    Alright...does ANYONE have any additional comments on this tester???

    Getting ready to pull the trigger and want to make sure no buyer remorse hits in.

    Thanks!

  4. #4
    MikeInMo is offline ** No working email address ** MikeInMo 0
    Join Date
    Oct 2004
    Location
    .
    Posts
    15

    Default Re: LaMotte ColorQ Water Tester

    Well I couldn't wait so it's GEEK AWAY and I ordered the tester. I live about 45 minutes from the closest pool store so hopefully this make those trips for testing unnecessary, plus no hard sell for chemicals. Still have a fair number of drop tests left so I can't wait to compare.

  5. #5
    salinda is offline Lifetime Member Weir Watcher salinda 0
    Join Date
    Dec 2004
    Location
    San Jose, CA
    Posts
    130

    Default Re: LaMotte ColorQ Water Tester

    I didn't get a good feeling from the AskAlanAQuestion website, so I found out I could order one directly from LaMotte. I went to their website and called the number off of the contact us link. They are backordered a little because they have been very popular.
    Salinda
    owner of ~35,000 gallon plaster IG pool/spa combo. Ikeric Dyna-Miser VS150 filter pump, 2 hp whisperflo spa jet pump, The Pool Cleaner 2x suction cleaner, Clean & Clear Plus 520 cartridge filter, Zodiac Clearwater LM2-40 SWG, Sta-rite 400k heater, solar heat pads and coils.

  6. #6
    MikeInMo is offline ** No working email address ** MikeInMo 0
    Join Date
    Oct 2004
    Location
    .
    Posts
    15

    Default Re: LaMotte ColorQ Water Tester

    Last night the ask alan website was showing a 2-3 week back order notice but when I looked at it today the notice was removed. I'll give it 4 or 5 business days and if haven't received it I'll escalate.

  7. #7
    Join Date
    Dec 1969
    Location
    Ft Lauderdale, Fl
    Age
    62
    Posts
    665

    Smile Re: LaMotte ColorQ Water Tester

    I used mine afew times this week. Works pretty good and easy to use. Takes away the human error factor, as long as you can count drops. The meter measures then shows you the test result.
    Very nice but a little bulky to carry in my suitcase when I travel.
    I was just in Phoenix (110 degrees!!!! WOW!) and the tester worked just fine. It didn't melt in my hands...
    Sean Assam
    Commercial Product Sales Manager - AquaCal AutoPilot Inc. Mobile: 954-325-3859
    e-mail: sean@teamhorner.com --- www.autopilot.com - www.aquacal.com

  8. #8
    Join Date
    Dec 1969
    Location
    .
    Posts
    5

    Thumbs up Re: LaMotte ColorQ Water Tester

    Quote Originally Posted by salinda View Post
    I didn't get a good feeling from the AskAlanAQuestion website, so I found out I could order one directly from LaMotte. I went to their website and called the number off of the contact us link. They are backordered a little because they have been very popular.

    See my previous reply, askalanaquestion.com has excellent service.

  9. #9
    salinda is offline Lifetime Member Weir Watcher salinda 0
    Join Date
    Dec 2004
    Location
    San Jose, CA
    Posts
    130

    Default Re: LaMotte ColorQ Water Tester

    Great! It is nice to know there is more than one source.

    Unfortunately, I am not able to use my ColorQ (see above). If you have high CH, think twice about using this system. Mine is in the 500-600 range, which people on this forum consider to be more than manageable. This is only a bit over the range of the CH test in the ColorQ, but it is "buffering" my results per LaMotte. I am pursuing a refund right now.
    Salinda
    owner of ~35,000 gallon plaster IG pool/spa combo. Ikeric Dyna-Miser VS150 filter pump, 2 hp whisperflo spa jet pump, The Pool Cleaner 2x suction cleaner, Clean & Clear Plus 520 cartridge filter, Zodiac Clearwater LM2-40 SWG, Sta-rite 400k heater, solar heat pads and coils.

+ Reply to Thread

Similar Threads

  1. ColorQ Calcium Hardness test fails
    By CraigLeg in forum Testing and Adjusting Pool Water Chemistry
    Replies: 2
    Last Post: 08-21-2012, 03:54 PM
  2. Testing water with red/yellow drop tester.. question.
    By mastamoon in forum Testing and Adjusting Pool Water Chemistry
    Replies: 4
    Last Post: 09-25-2011, 08:54 AM
  3. ColorQ tester
    By Kriggin in forum Testing and Adjusting Pool Water Chemistry
    Replies: 7
    Last Post: 07-19-2011, 03:01 PM
  4. problem with Lamotte color-Q 7 pro test
    By Amir in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 07-10-2007, 01:17 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts