+ Reply to Thread
Results 1 to 10 of 11

Thread: Pool Pilot "Low Amps Cell" (No chlorine)

Hybrid View

  1. #1
    Join Date
    Dec 1969
    Location
    Ft Lauderdale, Fl
    Age
    62
    Posts
    665

    Default Re: Pool Pilot "Low Amps Cell" (No chlorine)

    Scoobiedoob,

    Please check the Cell cord on both ends for any signs of corrosion or damage.
    If you're willing to check an electrical fuse, please call me on my cell phone tomorrow. The top left fuse is the cell fuse and may have blown, for whatever reason.
    IF YOU"RE WILLING, PLEASE TURN OFF POWER BEFORE MESSING WITH THE ELECTRICAL PORTION!

    954-325-3859

    Sean
    Sean Assam
    Commercial Product Sales Manager - AquaCal AutoPilot Inc. Mobile: 954-325-3859
    e-mail: sean@teamhorner.com --- www.autopilot.com - www.aquacal.com

  2. #2
    Join Date
    Dec 2004
    Location
    .
    Posts
    8

    Default Re: Pool Pilot "Low Amps Cell" (No chlorine)

    Hi Sean,

    I think I can handle checking that fuse. The connections look like new... I checked all of those at first.

    I called and left you a message.

    Thanks,
    Sonnie

  3. #3
    Join Date
    Apr 2006
    Posts
    9

    Default Re: Pool Pilot "Low Amps Cell" (No chlorine)

    Mine is doing the same thing, its only a 1 1/2 years old. Called autopilot, they were suppose to call me back today, still waiting.

  4. #4
    Join Date
    Dec 2004
    Location
    .
    Posts
    8

    Default Re: Pool Pilot "Low Amps Cell" (No chlorine)

    Well fortunately I found the problem with ours. It was a bad banana plug connector. When I took the cover off looking at the fuses, I also looked very close at all the connections... just basically tracing all of them down from outside to inside to see if maybe something was loose. I got to looking really close at the banana plugs and noticed the black one had a bubble on it, as if it had gotten hot and melted. So... out comes the ole trusty test meter and sure enough there was no contact from the black cable outside the box to the terminal inside the box. Unfortunately I did not have an extra banana plug lying around, so I hard wired the red and black wires to the inside, bypassing any banana plug connections. I suppose if that cable ever goes bad, I'll simply have to hard wire it again.

    Below is a link to a pic of the banana plugs... apparently a bad solder on the inside of the plug shorted it out.



    $30 worth of algaecide, $5 worth of bleach and a little jury rigging later, we are now functioning normally.

    26V 8.0A

    No more "Low Amps - Cell" warning.


    ...
    Sonnie
    Last edited by PoolDoc; 03-04-2012 at 07:09 PM. Reason: fix pics, picasa

  5. #5
    Join Date
    Apr 2006
    Posts
    9

    Default Re: Pool Pilot "Low Amps Cell" (No chlorine)

    I wish that was my problem, Its not I just checked it.

  6. #6
    Join Date
    Dec 2004
    Location
    .
    Posts
    8

    Default Re: Pool Pilot "Low Amps Cell" (No chlorine)

    Did you check the fuses? There appears to be three underneath the cover.

    As Sean suggests though... make sure you turn the power off before taking the cover off.

  7. #7
    Join Date
    Apr 2006
    Posts
    9

    Default Re: Pool Pilot "Low Amps Cell" (No chlorine)

    Checked the fused all okay. Sean is getting a service call put in.

+ Reply to Thread

Similar Threads

  1. Newbie just beginning to understand "free" and "total" chlorine. . .
    By Hainsworth in forum Testing and Adjusting Pool Water Chemistry
    Replies: 14
    Last Post: 06-30-2012, 10:17 AM
  2. Pool Pilot Low Amps Cell 0V 0.6A
    By vgg659 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 7
    Last Post: 05-22-2011, 01:07 PM
  3. Pool Pilot error message: "warning check/clean cell"
    By cscannon in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 8
    Last Post: 10-21-2010, 09:03 PM
  4. "Check System, No Cell Power" Error - Aqualogic PS-8
    By Geeper in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 5
    Last Post: 04-27-2008, 06:08 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts