Anyone out there using a two speed pump? I called my pool store asking about them and they said they are too expensive and don't sell well. I have read on here two speed is the way to go. It filters best in low speed and sweeps and backwashes best in high speed.
I have an above ground pool 17,000 gallon with a Hayward Power Flo LX 1.5 HP motor and pump with a Hayward Pro Series 200 lb filter. Currently the motor is running so hot I can't hold my hand on it at all. Is this normal? It over heated once and kicked out on me but hasn't since the one time. The motor/pump is 7 years old. I was wondering what to replace it with if it dies on me. Is there a two speed above ground motor and pump that will work for me and my current filter and is that the way to go to save electricity and to get a cleaner pool? I have read a 1.5 hp motor might be over driving my 200 lb filter anyway?
If anyone can explain the two speed pumps to me and if that is the way to go I would appreciate it. Do they have a special switch to switch it from low to high? Where can I buy one for an above ground pool? Thanks for your help.