Hard Plumbing

[scsteven]

Happy Memorial Day!! I have four questions for today
1. We're in the process of hard-plumbing the filter and pump. After searching and searching this forum, I can't find any specs or pics that clearly show how (or what is used) the rigid PVC is connected to the return line and the skimmer.
2. We are replacing our liner and adding a main drain to the pool. Pictures of plumbing for this would be helpful too.
3. Also, does anyone have any experience hard plumbing the return line to a 2-speed Waterway pump? It has a threaded fitting that looks like it needs an adaptor of some sort.
4. Any advice on how to drain the pool without using the filter/pump/vac combo? (Our pool has the buckled service panel that is getting replaced along with the liner and the addition of a main drain.) When should we start draining it? The pool guys are coming on June 6 to do the work. We are doing our own plumbing; it has to be ready to connect and go!
Thank you in advance!

[matt4x4]

Personally, I would NOT do a main drain on an AG pool, especially if in a frost zone - you would not believe the amount of movement an AG pool undergoes due to frost and that center drain will only become a problem spot. It's realatively easy to slope your ground inside the pool to be about 6" deeper in the middle, when setting your return jet to create a vortex, most dirt will accumulate in the center portion of your pool anyways and vacuuming that up really takes no time at all.

[scsteven]

In answer to my own question, we figured out how to connect the hard PVC to the skimmer and the return. The existing fittings screw out and so we took those to the hardware store and bought new ones that will screw into the new skimmer and return. It will work fine. Yeah!! Now we wait....

[tphaggerty]

Just make sure you use Schedule 40 PVC for your fittings and piping. It needs to say Schedule 40 (or Sch40 or something like that). Locally (in NY), of the "local hardware" store types, only Lowes carries Schedule 40. Home Depot doesn't and most of the smaller stores don't either. Pool stores do, some more than others.

This is important!! Waste lines and fittings (which HD does carry) are not pressure rated! Please recheck your fittings and pipes!! Also, you will need to make sure that you use a good PVC cleaner and at least medium strength PVC cement. Some folks like to use the purple PVC primer - I don't because it makes the pipe joints purple. I just clean very well using the PVC cleaner, then use the medium strength (black can normally) PVC cement.

[Pontiadict]

I just finished hard plumbing my pump and filter lines,and got all pipes and fittings from Home Depot.I guess some H.D.'s carry Sched.40 PVC and some don't.Down here in South Florida many homeowners have sprinkler systems
so there's definately a demand for it I guess.

John

[Hightech]

Ive been thinking of doing just this, but im curious what you all that have hard plumbed your AG pools do with your pump in the winter months, or are you all in warmer climates, seems I would have to be able to unhook the pump from everything else to bring it inside for the winter as well as my multi port valve on the filter?

TIA

[hrsdennis]

When doing solid plumbing I would strongly recommend three quck disconnects and two PVC shut off valves. That makes repairs and storage a breeze.

Dennis

[matt4x4]

As Dennis said - quick disconnects - the only way to go.
I find them to be a necessity anyways.

[scsteven]

This is exactly what we are doing, using lots of shut-offs and unions so that winter take-down is a breeze. I will post pics of our progress soon.. Next Wednesday is the day we get the new panel and liner! WooHoo!

[JMK3rd]

I'd love to see some pics of some AGP hard plumbing installs.

Anyone have any?