Intellichlor IC 40 SWG

[CanuckPool]

We just got the heater up and running and the temp is at 74, the SWG is on and its reading Good @60%. I am going to take some water in tomorrow to get some readings. The PB added 3 bags of salt so i am guessing between last year its at about 3300-3500 ppm. It almost sounds like a sensor is faulty on your unit... or the salt readings are incorrect.

[Jeffski]

Salt readings are consistent so unit must be faulty (or sensor, or something). PB is sending someone out, I'll report back.

Good news is that unit will occasionally jump to ADD, which means it starts working. Pool water has been great through all of this.