+ Reply to Thread
Results 1 to 8 of 8

Thread: Replaced spider gasket now leaking from waste

Hybrid View

  1. #1
    Join Date
    Dec 1969
    Location
    Attleboro, MA.
    Posts
    160

    Default Replaced spider gasket now leaking from waste

    Today I opened my pool and started the filter and water was leaking from the waste. I replaced the spider gasket on the filter. It is the correct spider gasket. I put the lubricant on it, maybe too much or not enough? Not really sure what the heck is going on. I can't put the old gasket back in because it was glued in or melted in so I had to break it apart to get it out.

    Am I doomed or will maybe the gasket end up compressing and working? Any suggestions would be appreciated.
    Nicole: 18' round AG with AstralPool Sand Filter and 1.5hp AstralPool Pump

  2. #2
    Join Date
    Apr 2006
    Posts
    395

    Default Re: Replaced spider gasket now leaking from waste

    Perhaps you also need a new spring to put the right amount of pressure on the gasket ???

  3. #3
    Join Date
    Jun 2006
    Location
    Central Texas
    Posts
    217

    Default Re: Replaced spider gasket now leaking from waste

    You could also install a valve in the waste line.

    TW
    Tom Wood
    15K IG Plaster, Sand Filter, Polaris 180

  4. #4
    Join Date
    Dec 1969
    Location
    Attleboro, MA.
    Posts
    160

    Default Re: Replaced spider gasket now leaking from waste

    I read in another thread that putting a ball valve could be dangerous because of a buildup of pressure. Is that true?
    Nicole: 18' round AG with AstralPool Sand Filter and 1.5hp AstralPool Pump

  5. #5
    catnip is offline Registered+ Thread Analyst catnip 0
    Join Date
    Aug 2006
    Location
    Blue Mountain Beach, FL
    Posts
    67

    Default Re: Replaced spider gasket now leaking from waste

    I do not recommend putting a valve on the waste (backwash) line to stop a leaking spider gasket. I tried the same think and ended up with a pressure buildup in the backwash line that caused the backwash sight glass to leak. You should get the spider gasket fixed.
    Chuck
    16,000 gallon gunite/plaster, Pool Pilot Digital SC-60, Pentair UltraFlow 1 HP pump, Pentair Tagelus TA 60 filter, Polaris 280

  6. #6
    Join Date
    Dec 1969
    Location
    Attleboro, MA.
    Posts
    160

    Default Re: Replaced spider gasket now leaking from waste

    I called the manufac. of the filter, Astral. They said I need to glue in the spider gasket with super glue. I just glued it in. Haven't installed it back in yet not sure how long I'm supposed to let it dry for. I'm hoping that fixed the problem but we'll see.
    Nicole: 18' round AG with AstralPool Sand Filter and 1.5hp AstralPool Pump

+ Reply to Thread

Similar Threads

  1. Need a Hayward spider gasket
    By Bkirrane in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 05-28-2012, 09:30 AM
  2. Spider Gasket
    By markphin in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 05-21-2012, 12:18 PM
  3. Hayward spider gasket...uh missing?
    By scarywoody in forum Pool Equipment & Operations
    Replies: 10
    Last Post: 06-07-2007, 12:03 PM
  4. Spider Gasket - First Obsticle
    By Sprint54 in forum In-Ground Pool Construction and Repair
    Replies: 9
    Last Post: 05-15-2006, 09:31 AM
  5. Replacing Spider Gasket
    By let_her_flicker in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 04-22-2006, 10:49 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts