Results 1 to 7 of 7

Thread: pressure rise with new sand filter

Threaded View

  1. #7
    induce is offline ** No working email address ** induce 0
    Join Date
    Nov 2004
    Location
    .
    Posts
    30

    Default Re: pressure rise with new sand filter

    it is one of the hayward pro series S310T2. it is rated @ 50 psi.
    it takes 500 lb sand. it's working great. just running @ 20 psi with pump on high. that northstar pump is moving some water.....quietly too.
    does anyone show pressure when backwashing? it shows 20 then too.
    the back wash pipe is only about 8 ft long and has 3 90's in it and is 1.5' pipe.
    about the guage, it may be new, but it looks like the old one, they are both hayward filters, so they may be the same. it has that re-setable second hand that shows backwash time.
    Last edited by induce; 05-23-2007 at 05:43 PM.

Similar Threads

  1. Sand Filter Pressure Problems; Sand Bad in 3 MONTHS of USE?
    By MikeInMo in forum Pool Equipment & Operations
    Replies: 10
    Last Post: 05-30-2007, 11:01 PM
  2. New Sand Filter High Pressure
    By rlanthony@excite.com in forum Pool Equipment & Operations
    Replies: 4
    Last Post: 03-25-2007, 06:52 AM
  3. Sand filter pressure
    By dannyboy in forum Pool Equipment & Operations
    Replies: 13
    Last Post: 06-15-2006, 06:04 PM
  4. Sand Filter Pressure Question
    By hondo2160 in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 2
    Last Post: 05-31-2006, 07:43 PM
  5. Pressure issues Sand Filter
    By let_her_flicker in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 05-28-2006, 10:58 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts