Results 1 to 2 of 2

Thread: Will this pump/filter work?

Threaded View

  1. #2
    Join Date
    Dec 1969
    Location
    Oklahoma city, Oklahoma, USA.
    Age
    60
    Posts
    8

    Default Re: Will this pump/filter work?

    I am not sure but I put a 1 1/2 hp pump on a 18in sand filter and when I try to vac the pool the hose sucks together and air get in the line. also when the automatic cleaner is vaccumeing the pool it also sucks up air. I also question if my pump is to strong for the filter. The pump reads a flow rate of 90 gpm.
    the filter a haward S180t it said 20gpm filtration rate. Like i said I get air in my lines, Iknow my hoses dont leak the only place i cant tighten is the skimmer to the pool, I am afraid of breaking the plastic the screws srew into. any help would be great.
    Last edited by KWBourn; 05-23-2007 at 07:53 PM. Reason: more info
    Kurt Bourn
    24' round 12,000 gal
    Oklahoma City

Similar Threads

  1. Intex sand filter 1500 with Wanda the whale pool cleaner hard to get it to work
    By vickeybear in forum Pool Cleaning: Manual or Automatic
    Replies: 2
    Last Post: 05-16-2011, 07:25 AM
  2. Pump broke so SWG cant work- slime-what to do?
    By melifair in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 4
    Last Post: 06-29-2007, 04:49 PM
  3. Is it normal for fine sand to work it's way through the filter?
    By nicole12 in forum Pool Equipment & Operations
    Replies: 5
    Last Post: 06-03-2007, 08:24 PM
  4. Will a two-speed motor work with an older pump?
    By stualden in forum Pool Equipment & Operations
    Replies: 5
    Last Post: 09-24-2006, 06:54 AM
  5. 1/2 HP Pump will work well for almost any pool... LONG POST
    By John from Florida in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 05-28-2006, 08:19 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts