+ Reply to Thread
Results 1 to 2 of 2

Thread: Will this pump/filter work?

  1. #1
    mjs31 is offline Registered+ Thread Analyst mjs31 0
    Join Date
    Jun 2006
    Location
    Texas
    Posts
    81

    Default Will this pump/filter work?

    I found out that the pool I am getting does come with the basics including the following.

    Waterway 1.5HP 1 speed pump with 22" Sand filter. Apparently this is a kit combo.

    My pool is a 24' 54" deep round Emerald Isle (artesian). I am wondering if I would be best to buy a smaller pump since 1.5hp is over kill or just use this one? If I do can I still use the Waterway sand filter or should I get something else?

    Thanks

  2. #2
    Join Date
    Dec 1969
    Location
    Oklahoma city, Oklahoma, USA.
    Age
    59
    Posts
    8

    Default Re: Will this pump/filter work?

    I am not sure but I put a 1 1/2 hp pump on a 18in sand filter and when I try to vac the pool the hose sucks together and air get in the line. also when the automatic cleaner is vaccumeing the pool it also sucks up air. I also question if my pump is to strong for the filter. The pump reads a flow rate of 90 gpm.
    the filter a haward S180t it said 20gpm filtration rate. Like i said I get air in my lines, Iknow my hoses dont leak the only place i cant tighten is the skimmer to the pool, I am afraid of breaking the plastic the screws srew into. any help would be great.
    Last edited by KWBourn; 05-23-2007 at 06:53 PM. Reason: more info
    Kurt Bourn
    24' round 12,000 gal
    Oklahoma City

+ Reply to Thread

Similar Threads

  1. Intex sand filter 1500 with Wanda the whale pool cleaner hard to get it to work
    By vickeybear in forum Pool Cleaning: Manual or Automatic
    Replies: 2
    Last Post: 05-16-2011, 06:25 AM
  2. Pump broke so SWG cant work- slime-what to do?
    By melifair in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 4
    Last Post: 06-29-2007, 03:49 PM
  3. Is it normal for fine sand to work it's way through the filter?
    By nicole12 in forum Pool Equipment & Operations
    Replies: 5
    Last Post: 06-03-2007, 07:24 PM
  4. Will a two-speed motor work with an older pump?
    By stualden in forum Pool Equipment & Operations
    Replies: 5
    Last Post: 09-24-2006, 05:54 AM
  5. 1/2 HP Pump will work well for almost any pool... LONG POST
    By John from Florida in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 05-28-2006, 07:19 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts