+ Reply to Thread
Results 1 to 4 of 4

Thread: Lomart skimmer modify?

Hybrid View

  1. #1
    Join Date
    May 2006
    Posts
    40

    Default Re: Lomart skimmer modify?

    The new one I have does not have the step fitting that has a smaller one can cut off.
    The inside of the pipe is only about 1" and I was worried it can not supply enough water to my 1 hp pump.
    Wonder why lomart makes thiers a bit smaller than normal.

  2. #2
    Join Date
    Apr 2006
    Location
    Apache Junction, Az
    Age
    70
    Posts
    475

    Default Re: Lomart skimmer modify?

    I would not try to modify it, the very little you might gain would not be worth it.

    Filter systems can usually take in more water than they can pump out. A second return is usually the way to increase the flow of the filter.

    Later, Dennis
    AG pool installer
    Arizona

+ Reply to Thread

Similar Threads

  1. Lomart variable depth liner installation help
    By ChrisinEHT in forum Above-Ground Pool Construction & Repair
    Replies: 3
    Last Post: 07-20-2012, 07:18 PM
  2. How to modify Intex ABG pool fittings to accept 11/2" pvc pipes?
    By traxx2003 in forum Intex-type Pool Setup & Operations
    Replies: 3
    Last Post: 06-23-2012, 10:17 AM
  3. How to repair an IG liner leak at the skimmer interface and replace skimmer
    By ralph in forum In-Ground Pool Construction and Repair
    Replies: 0
    Last Post: 02-29-2012, 09:37 AM
  4. CYA Only in skimmer?
    By posguy in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 4
    Last Post: 06-07-2011, 01:05 PM
  5. Looking at a 18x33 Lomart
    By Dave45n in forum Above-Ground Pool Construction & Repair
    Replies: 9
    Last Post: 06-18-2006, 09:37 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts