Possible to separate pipe from valve body??

[cruzmisl]

Awesome, that saves me a lot of work. I was looking at the valve today and wondering if I could get a larger pipe that will go on the outside of the valve and then reduce later.......

[catnip]

Joe, the Jandy valves are made to accept two sizes of schedule 40 PVC pipe, one inside and one outside, e.g. 1.5" inside and 2" outside or 2" inside and 2.5" outside. So, you can use the next larger pipe size to connect to the valve and reduce back to the original size.

[cruzmisl]

I wanted to hear that! thanks a ton!!!!