+ Reply to Thread
Results 1 to 5 of 5

Thread: Measured Density of Dry Chemicals

Hybrid View

  1. #1
    mas985's Avatar
    mas985 is offline Lifetime Member Whizbang Spinner mas985 3 stars mas985 3 stars mas985 3 stars
    Join Date
    Dec 2004
    Location
    Pleasanton, CA
    Posts
    1,423

    Default Re: Measured Density of Dry Chemicals

    I have a 5lbs container of CYA from Home Depot. I measured the volume to be about 10.5 cups so the density is close to 2270/2478 = .92 g/ml which is pretty far off of theoretical. The granuals are fairly large which might account for the difference.
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

  2. #2
    Join Date
    Jun 2006
    Posts
    17

    Default Re: Measured Density of Dry Chemicals

    Thanks Richard this is most helpful.

    Since I started at a cya of 0 this year and have a 30K+ pool I will need a lot of pucks to get to 40-50. Your analysis also explains the modest increase in cya I have seen to date after 20 pucks.

    One advantage of bringing up the cya slowly with pucks, is that the FC that I can maintained consistently is 4.5-8 (depending on the number of pucks used simultaneously) and this is a very effective algaecide at the low cyas seen early after opening. My pool is always green and murky on opening no matter how good the cover is (the joys of being surrounded by large trees), but is crystal clear at the end of 7 days after lots of chemicals and the mega puck approach (no matter how poor the pool company is!). Assuming my cya drops again during next winter, this seems a reasonable approach to recuscitation in the spring.
    Thanks again

+ Reply to Thread

Similar Threads

  1. Want to get the chemicals right ...
    By Debits26 in forum Pool Chemicals & Pool Water Problems
    Replies: 20
    Last Post: 07-29-2012, 06:39 PM
  2. HOW MUCH Chemicals
    By chris cody in forum Testing and Adjusting Pool Water Chemistry
    Replies: 1
    Last Post: 08-01-2006, 12:16 AM
  3. Where To Buy Chemicals
    By msb1766 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 9
    Last Post: 07-19-2006, 12:24 PM
  4. Chemicals & #'s Have Me???????!!!!!!
    By MsSmiley in forum Testing and Adjusting Pool Water Chemistry
    Replies: 1
    Last Post: 07-09-2006, 08:20 PM
  5. OTO and CYA and TC, oh my! What's being measured?
    By aquarium in forum Testing and Adjusting Pool Water Chemistry
    Replies: 15
    Last Post: 06-13-2006, 10:02 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts