I wonder why no creative soul has developed a leak detection tool--a pole with a cable and a trigger--whereby a pool owner could lower it into their deep end, squeeze the trigger, and dispense dye in order to find a leak?
I'm starting to think I may have to shell out a crazy amount of money to have a leak detection person come to find my liner leak because by the time I paddle to the bottom of the deep end (9 ft.), holding my breath, there will likely be too much turbulence and not enough air time to wait for the turbulence to clear and then squeeze the dye around even one perimeter section. Unless, of course, the leak is in the shallow end where I should be able to use a snorkel and mask and reach to the bottom with the dye in hand.
If the leak's in the deep end, I'm thinking maybe I could carry one of my 10 or 12-lb. barbells in one hand so as to create less turbulence, assuming that's enough to bring me down without paddling. Then again with the weight maybe I could put on my wetsuit and go in (water's only about 73 right now). If the 12-lb. weight isn't enough, though, because wetsuits are so bouyant, I'll just have to wait another week or two until the water warms up.
I thought I had a leak with the solid winter cover on because I was losing about an inch a month, and I don't recall in any of these past 4 or 5 seasons having to add water during the winter. Now that it's uncovered, I'm losing a good inch every 3 or 4 days -- way too much for evaporation, and which makes me think the leak is getting bigger. Since my liner is at the end of it's life (but still hanging in), I don't like the idea of all that water sitting behind it somewhere, so I may try my idea in the next few days. Wish me luck, but if anyone has any other ideas, I'd be glad to hear about them!
Bookmarks