Reply With Quote
What is your filter PSI with the 2 lines shut off? If it is more than 20 PSI, you should be OK.
Hayward Phantom w/o booster pump?
Hello - is anyone running a Phantom without a booster pump? I have three returns with valves at the beginning of each so I can adjust the water flow. A Northstar 1.5hp (full rated) feeds three separate 2" lines back to the pool. If I shut off 2 lines I get a scary amount of water gushing out the side return. I can't imagine why I would need a booster pump. Any thoughts??
Thanks,
Scott
Re: Hayward Phantom w/o booster pump?
What is your filter PSI with the 2 lines shut off? If it is more than 20 PSI, you should be OK.
Mark
Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
Posting Permissions
Bookmarks