+ Reply to Thread
Results 1 to 10 of 49

Thread: help with adjusting please

Hybrid View

  1. #1
    Join Date
    May 2006
    Posts
    128

    Default help with adjusting please

    21,000 gallons inground. cl 5.0 ph 6.8 cya 50 ta 150
    i had posted in the alage section problems encountered
    had been keeping pool to shock to rid the green, green now gone
    then had problem with brown stains
    added 2 quarts of pool magnet plus for metals
    has helped with the stains but some still there
    haven't added bleach since last night
    questions now: do i add my gallon of bleach now to maintain cl levels?
    do i add ph increaser now too and if so same time as bleach?
    do i add any more pool magnet plus for the remaining
    stains now too and if so can it be added same time too?

    I need to know the steps on how to continue and with what?
    please help advise me so i know what is next and not screw up the progress i have made thus far. thank you.

  2. #2
    drband's Avatar
    drband is offline Lifetime Member Thread Analyst drband 0
    Join Date
    Dec 2004
    Location
    Gainesville, GA
    Posts
    84

    Default Re: help with adjusting please

    You need to get your pH up! TA looks plenty high, so I would suggest adding a box of borax and then re-checking the pH after an hour or two. You will probably need to keep your cl up for a while longer, but right now, it's important to raise ph to 7.2-7.6. You chlorine will work better, too. All that said, there are folks that know a lot more about this on this site... they'll chime in to help you!

  3. #3
    Join Date
    May 2006
    Posts
    128

    Default Re: help with adjusting please

    new problem, its beginning to get cloudy! what do i need to do to fix this? please give me some advise. I need help!

  4. #4
    drband's Avatar
    drband is offline Lifetime Member Thread Analyst drband 0
    Join Date
    Dec 2004
    Location
    Gainesville, GA
    Posts
    84

    Default Re: help with adjusting please

    Relax... be patient w/ the process and it will eventually clear when you get pH in the right range and then keep the cl up to shock level until everything finally clears up.

    ph 7.2-7.6 is your target!

  5. #5
    drband's Avatar
    drband is offline Lifetime Member Thread Analyst drband 0
    Join Date
    Dec 2004
    Location
    Gainesville, GA
    Posts
    84

    Default Re: help with adjusting please

    hopefully some other folks will add some suggestions. I think your metals problem is related to your ph and shock level too, but I don't have the knowledge to help you.

  6. #6
    Join Date
    May 2006
    Posts
    128

    Default Re: help with adjusting please

    i think you are right but i don't know enough either and i don't want to do anything to screw it up. i really do appreciate you answering and trying to help me and i too hope that someone will answer that does know so i can get on this before it gets worse. so for now all i can do is wait and hope that one of them will answer and tell me what to do before the problem gets worse. thanks

+ Reply to Thread

Similar Threads

  1. pH adjusting
    By Larryh86GT in forum Testing and Adjusting Pool Water Chemistry
    Replies: 4
    Last Post: 06-13-2013, 06:00 PM
  2. help adjusting
    By poolhelp101 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 8
    Last Post: 05-31-2013, 12:39 AM
  3. help adjusting
    By poolhelp101 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 14
    Last Post: 06-17-2012, 07:27 PM
  4. adjusting alk, PH, and cl
    By spongebob55 in forum Pool Chemicals & Pool Water Problems
    Replies: 1
    Last Post: 06-23-2007, 06:02 PM
  5. adjusting low pH
    By fullhouse in forum Testing and Adjusting Pool Water Chemistry
    Replies: 4
    Last Post: 04-25-2006, 01:49 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts