Timer to motor and aquarite..."Y"or "T" fitting?

[BND]

If you have an Intex timer, it has additional "punch outs" on the bottom and sides. These are pre-scored holes that you knock out so you can add additional conduits. My simple timer has 4 of these (of which I am using 3).

Mine is an intermatic box, whern i went out to look at the name is discovered the there is infact one pre-scored hole, but it is so light i could barley see it before.
It is on the opposite side of the box than the aquarite, so i need to be a bit creative in running the flex, but not a big deal.

Thanks for making me look harder.

[nater]

You can make a hole just about anywhere with a drill and a dremel tool