Results 1 to 4 of 4

Thread: Timer to motor and aquarite..."Y"or "T" fitting?

Threaded View

  1. 04-22-2007 09:14 PM #1
    BND
    BND is offline Registered+ BND 0
    Join Date
    Dec 1969
    Location
    .
    Posts
    28

    Default Timer to motor and aquarite..."Y"or "T" fitting?

    A small issue...i am about to wire my aquarite. I found that my timer box has just one exit hole( 1/2") which my pump motor is wired to/through with a flex fitting. Is there such a thing as a "Y" or "T" adapter so i can run the wiring for my aquarite in to the same hole? ( Home depot electrical guy said he'd never seen one.

    I though about drilling another hole, but if there is a better solution id like to hear it.
    Thanks
    Last edited by BND; 04-22-2007 at 09:16 PM.
    Reply With Quote Reply With Quote
« SWG's and CL Shock | Trying to keep up w/ Chem Geek »

Similar Threads

  1. Newbie just beginning to understand "free" and "total" chlorine. . .
    By Hainsworth in forum Testing and Adjusting Pool Water Chemistry
    Replies: 14
    Last Post: 06-30-2012, 10:17 AM
  2. Can a leaking Jandy "Check Valve" with clear top be "fixed"?
    By 105ex in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 05-29-2010, 08:17 AM
  3. Changing AG pool depth from 52"-54" to 46"-48" for kids (shallow end tricks)
    By zephans in forum Above-Ground Pool Construction & Repair
    Replies: 9
    Last Post: 06-02-2007, 11:28 AM
  4. Clarification of "tied up" vs "Free"?
    By cschnurr in forum Using Chlorine and Chlorinating Chemicals
    Replies: 11
    Last Post: 07-21-2006, 07:03 AM
  5. Esther Williams "Millenium" Pool Install "issue"
    By mrpurrhead in forum In-Ground Pool Construction and Repair
    Replies: 3
    Last Post: 06-12-2006, 10:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules