It's amazing how well a little bleach works, isn't it?? Thanks for posting the pics, just another job well done by a follower of the BBB method.
You're right in using muriatic acid to lower your pH, although I think you need to retest the pH now that your chlorine isn't up so high--sometimes high chlorine levels can give you a falsely high reading. And don't worry, a pH of 8.2 isn't going to hurt your liner....it's by far worse to have it too low than to have it too high. Be careful with the acid..I don't know if you've used it before or not, but make sure you stay upwind of the fumes, and don't splash it on your skin or eyes...I STRONGLY advocate using gloves and safety glasses.
Congratulations on a clean, clear pool!
Jan
Bookmarks