Skimmer and returns poor position

[waste]

Rick, what I'm picturing is a double 'Roman end' with reverse radius corners.
If I'm picturing this correctly, it's going to be very hard to eliminate the 'dead spots', the 'irregular' shape of the corners and ends with only 2 returns (located as they are) preclude a circular motion of the water, you may end up having to use the skimmer net daily to get all the debris - or let it sink and have the polaris get it.
However, you could try pointing the shallow end return at the opposite shallow end corner (point it ~ level with the surface so that you see the ripples start ~ 5 -6' out from the wall) and use the side flow 'eyeball' in the deep end return - point it down and towards the skimmer (you don't want to see ripples caused by this one, point it down just enough so that they disappear). It may take a little 'tweeking' of the directionals to maximise the effect, and there will probably still be dead spots, but that's the best I can come up with right now - let us know how it works.

[edit] just saw the pics you posted - corners aren't reverse radius, but the spa is - the 'corners' where the spa meets pool wall will always be a dead spot [/edit]