OK, so it has been a number of days while I have been working the PH down with acid and I am in the range I need to be, 7.0-7.2.

Should not the TA be down also? I inquire because my TA is at 250ppm. I used my Taylor Kit at the 10ml mark, added the drops accordingly to the directions annd it took 10 drops to go from green to red and multiply x 25 = 250ppm.

What gives? Do I need to take it lower still, the PH that is? I realize that below 7.0 there is significant problems on a vinyl..so please direct me as to what to do next. I thought I had this doggy whipped...

Bob-