Aquarite displaying 'pcb' in display

[mphare]

I'll try to find that Taylor kit for salt.. sounds like a good one to have if you have a SWG.

I'll also try the diag button to see what's what.

Thanks for all the info and help!

[mphare]

Well, the Aquarite seems to be feeling much better.
When I got home this afternoon, I checked the system and the readout was 2800 ppm, which is close to what I assumed it would be.

The diagnostic button revealed the instant salinity to be 2900, pretty close.

I checked Chlorine levels and I was at about 4 to 5 ppm, so I'm at least generating CL.

I checked CYA and I'm out, so I need to up the CYA, bump up the CL and hopefully I'll be set for the season.

Calling the service co tomorrow and canceling the service call, at least until it fails again.

Thanks for all the help!

[waste]

Mike, glad to hear things have sorted themselves out without a $ervice call! If you have any more problems, ask us and we'll do what we can for you!

[mphare]

Yup. Things look much better. Still running this morning. Holding at 2800 ppm.

Called the service co and canceled the call.

Thanks for all the advice!