Can't Get Clear (Have PS233 Results)

[IceT1]

Hello all. Please allow me to chime in here since I also have similar problems posted in this thread. First, my pool is 14x28 vinyl IG, 12K with sand filter. After discovering Pool Solutions late last year, I decided to convert to Ben’s methods. Upon opening this year (4-23), I was amazed how fast the green went away in the pool water using 6% bleach. While waiting for the PS234 to arrive, all I have is the OTO cl and ph and so I don't know where my cl level is above 3ppm. The green has been gone several days and I've brushed and vacuumed several times to ensure I've killed the algae attached to the surfaces. My problem is heavy white cloudy water. From past experience, I assume this to be dead algae, but flocking didn’t settle it. Other than after flock app, the pump/filter is running 24/7 and I've cleaned the sand with last year's pool store filter cleaner. I don’t understand what this milk effect is, which reduces visibility to one foot or so. Any suggestions please? Thank you much!

[DavidD]

We really need a full spectrum of numbers (FC, PH, CH, ALK etc.) which you may not be able to post. In order to get a more accurate chlorine reading using your current test kit, take a sample of your pool water and mix it with an equal amount of purified (bottled) water then double the number you come up with. This should expand your test to 6. If it reads 6, then use two parts purified water to one part pool water, this should expand your test to 9. I'm thinking you can at least get your chlorine in order (which may be the culprit) while waiting for a good test kit.

[mwsmith2]

It may be dead algae in the water column, it may be Ca problems, it could be lotsa stuff. However, saying that you can't see past one foot, it sounds like something other than algae to me. Need to get a full workup on your water to determine what's wrong.

Oh, did you use any CaHypo to shock?

Michael