Ok,


1st of, I just want to say I am only running the pump 4hrs a day now. I turned it down about a week ago. It used to run 8 hrs then.

So here are the new salt strip results:

5.6 = 3240 ppm

On my AquaRite guage is shows a reading of 3500.

If aquarite is correct, it seems I am a little over.

I turned down the aquarite to 30. It was @ 40. Not sure it if will make a difference or not.

Since water and swimming is still a little cold, I think by spring, it will be @ its correct reading. What do you guys say right now? Thanks