Closed Thread
Results 1 to 9 of 9

Thread: Brushing new plaster

Hybrid View

  1. #1
    Join Date
    Nov 2004
    Location
    Boca Raton, FL
    Posts
    18

    Default Re: Brushing new plaster

    Our pool was just plastered wed 4/26, filled 4/27 and is now just sitting as the start up guy has not shown yet. Finally got him on the phone and he says don't do anything, I'll prob. be out Monday - but you can swim if you want.

    Swim???? in a pool thats been sitting for almost 3 days now with no chemicals, no pump/filter running, and some misc. bugs, small amt. of grass clippings and bits of sand at the bottom?

    I asked him if we should be brushing, he said no, not to do anything.
    ???

  2. #2
    Join Date
    Apr 2006
    Posts
    17

    Default Re: Brushing new plaster

    I will be filling my new pool next week. We are going with colored plaster(med. grey) same as the last pool............Lasts months that is.
    First we were told brush. Then not to brush. Wich is it? And what exactly does brushing do ?
    I am so happy to have this board as a source of info! And thankyou for the much needed information.

  3. #3
    GutierrezPlastering Guest

    Default Re: Brushing new plaster

    Quote Originally Posted by HAYMAN
    I will be filling my new pool next week. We are going with colored plaster(med. grey) same as the last pool............Lasts months that is.
    First we were told brush. Then not to brush. Wich is it? And what exactly does brushing do ?
    I am so happy to have this board as a source of info! And thankyou for the much needed information.

    You need to brush it due to the Lime that the Marblemix contains, once it is applied and the plaster dries it releases the Lime. When your pool is done when the plasterers are complete rub your hand on the plaster and you will see your skin is a little white. Its just an effect from the Marblemixed sand. Once your pool is up and running brush it twice a day for two weeks, and don't let your polaris run either or it will leave wheel marks on the newly plastered surface.

  4. #4
    Join Date
    Apr 2006
    Posts
    17

    Default Re: Brushing new plaster

    I wondered where those marks came from...........................Can't thankyou enough for the info.

Closed Thread

Similar Threads

  1. Brown water after brushing
    By lucybfiddle in forum Pool Chemicals & Pool Water Problems
    Replies: 14
    Last Post: 07-21-2012, 11:45 PM
  2. Brushing the walls?
    By hoffmans in forum Above-Ground Pool Construction & Repair
    Replies: 7
    Last Post: 08-22-2007, 01:29 PM
  3. Brushing an IG Vinyl Pool
    By iwannapool in forum Pool Cleaning: Manual or Automatic
    Replies: 3
    Last Post: 04-19-2007, 02:40 PM
  4. Brushing new plaster
    By JonnyG in forum In-Ground Pool Construction and Repair
    Replies: 6
    Last Post: 06-02-2006, 01:17 PM
  5. CYA and brushing
    By smokeygrl in forum Testing and Adjusting Pool Water Chemistry
    Replies: 6
    Last Post: 05-17-2006, 01:07 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts