anyone do pebble tec and wish they didn't?
or wish they would have spent the extra for it?
PJ,
Looks like you have asked some really good questions. Decisions, decisions, decisions. Welcome to the hardest part of a pool build. You mentioned that you think you found a good pool builder. Can I suggest that you go and take a look at some of his/her work. Specify some of the things in a pool you would like to see to help you make your decisions.... i.e. pebble tec finish, plaster, spa dimensions, number of jets, cleaning units, etc. That will also give you an idea of what the workmanship of the builder will be. Ask the pool owners as many questions as possible... How satisfied with builder? How long did the build take? If you could change anything, what would it be?
As for my system:
22 x 36 with 9' wide tanning ledge (21k gallons) Deep End = 6.5'
Plaster
SWG system
8' spa with 8 jets (2.1/2" piping)
Polaris 280
Cool Deck Finish
Good Luck
anyone do pebble tec and wish they didn't?
or wish they would have spent the extra for it?
My Brother has Pebble Tech, his Family doesn't like it, too rough. He says if they stay in the pool too long, the Kids get scrapes from the Pebble Tech surface.
Mark
Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
Bookmarks