+ Reply to Thread
Results 1 to 7 of 7

Thread: Interesting read

Hybrid View

  1. #1
    Join Date
    Dec 1969
    Location
    .
    Posts
    38

    Default Re: Interesting read

    Quote Originally Posted by mas985 View Post
    I have a suction side that works pretty well from this company:http://www.thepoolcleaner.com/2xpoolcleaner.html

    The downside is that when the solar is on, the cleaner does not work as well. It is difficult to set the suction properly for with and without solar. If I had to do it over again, I probably would go with a robotic so I could run it at night without having to run the main pump.
    That is the one (well the 4x4 actually) I have been looking at.
    I don't have solar nothing, But do you mean a solar blanket, or solar collectors?
    Actually my navigator has been a pretty good cleaner, just wore out after 5 years of running around the pool (go figure, plastic against plaster). I actually have not heard anything bad about the Thepoolcleaner, but information is hard to come by. I was hoping for something at least as good as the navigator and a little better at leaves and acorns. Something I can leave in all the time.

  2. #2
    mas985's Avatar
    mas985 is offline Lifetime Member Whizbang Spinner mas985 3 stars mas985 3 stars mas985 3 stars
    Join Date
    Dec 2004
    Location
    Pleasanton, CA
    Posts
    1,423

    Default Re: Interesting read

    By solar I mean solar collectors. The issue with solar is that it adds return head (i.e. PSI goes up) which reduces the flow and also reduces the suction somewhat. I can adjust the amount of suction to the cleaner with a valve but I do not want to do that for each time the solar is on or off so I must make a compromise of somewhere in between. Too much suction on the cleaner is not a real problem but the pump can draw in air when the suction is too great. Again not a real big issue.

    The best thing about thepoolcleaner is that it requires less suction than most other cleaners so for a low HP pump or with solar, like me, it will still work when the suction drops a bit. However, when the suction drops, it moves slower and will not climb the walls as well. Still not a bad trade off.
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

+ Reply to Thread

Similar Threads

  1. just saw an interesting guarantee...
    By drband in forum Dealing with Algae & Slime
    Replies: 15
    Last Post: 06-24-2011, 10:42 PM
  2. Interesting Questions
    By giroup01 in forum General Interest
    Replies: 2
    Last Post: 04-15-2011, 07:02 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts