Welcome to the forum. Need a little more info about the possible leak issue like the type of pool. You should try and estimate the rate at which the water is being lost. Best way to do this is to estimate the surface area of the pool and then make periodic measurements of the water level and note the time. You can then compute the loss rate in gallons per hour or some other units. Depth measurements can be made with a simple ruler by measuring the water level at a known point on a step or relative to the top of a skimmer faceplate, or some other known, consistant reference point. Once we know the loss rate we can decide if you have a problem. Next step would be to determine if running the pump has any effect. Off the cuff, adding 3X per week seems a bit much.
Al
Bookmarks