+ Reply to Thread
Results 1 to 2 of 2

Thread: Another pressure question

  1. #1
    Sumo1 is offline Registered+ Weir Watcher Sumo1 0
    Join Date
    May 2006
    Location
    Georgia
    Posts
    209

    Question Another pressure question

    I've had earlier questions about operating pressures before (see "Pressure problem"). Now I've noticed when I turned off my skimmer to wait for the big oak tree to finish dropping leaves, the filter pressure dropped 5psi and stayed down. I would think that drawing water from more sources than just the main drain would have lowered FP.? TIA
    20x40 IG gunite free form, approx. 27K gal, 60sq DE filter, Jandy Stealth 2hp 2speed pump, Polaris 380, SWCG

  2. #2
    Join Date
    Dec 2004
    Location
    Indiana.
    Posts
    700

    Default Re: Another pressure question

    Quote Originally Posted by Sumo1 View Post
    I would think that drawing water from more sources than just the main drain would have lowered FP.? TIA
    When you close the skimmer, you are restricting the amount of water the pump can take in, so you are limiting how much it can pump. Pressure is measured on the outlet side of the pump, and is an indication of how hard the pump is working to force water through the filter and return plumbing. The less water the pump is trying to push, the easier it is to get that water through the system, so the pressure will be lower.

+ Reply to Thread

Similar Threads

  1. Spa jet pressure question
    By JohnASmith in forum Pool Equipment & Operations
    Replies: 8
    Last Post: 02-26-2012, 01:04 PM
  2. newbie question about jet pressure?
    By Txboynjgirl in forum Pool Equipment & Operations
    Replies: 0
    Last Post: 06-18-2011, 08:17 AM
  3. Filter Pressure question
    By donkipp in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 07-27-2006, 06:44 PM
  4. Sand Filter Pressure Question
    By hondo2160 in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 2
    Last Post: 05-31-2006, 07:43 PM
  5. pump pressure question
    By NCMOMTO3 in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 05-08-2006, 11:03 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts