ehorn's pool build

[ehorn]

Here is a close up of the top of the waterfall for those that are curious:

[No Need]

Looks good. How soon will it take to finish?

[ehorn]

I think it's only going to take another couple weeks to finish. We have only one major thing that might prevent that, I measured the shallow end and it seems like it's 6" too deep. Might not sound like much but my wife would be under water only 5' from the edge of the pool. Also it won't pass code, code says that the shallow end shall be no more than 3'6" deep and slope at no more tan going down 1' for every 7' out.

The superintendant will be measuring the pool next week which is what will be holding up the deck layout because they dont' want to have to shoot more gunite over new deck.

Ok thats a long answer but we'll be done before xmas. I'm keeping my fingers crossed!

[ehorn]

We got some good news today, the depth of the pool is correct so I guess it was just my imagination but I had measured it as too deep. They did go ahead and lay out the deck but prior to us actually confirming that the plan was correct. The sales guy will be out Thursday morning to review the plans and make changes. It is starting to come together fast and the pool should be done in a week or two once the deck is poured which could be Friday or Monday.

[Phillbo]

in the last pic of your pump/filter equipment I see that they painted the PVC. I've been wanting to paint mine to protect it from the sun. Can you find out if they used a special paint or home depot krylon..

[Socal_biker]

in the last pic of your pump/filter equipment I see that they painted the PVC. I've been wanting to paint mine to protect it from the sun. Can you find out if they used a special paint or home depot krylon..

For myself, I just used Krylon spray paint for plastics from Home Depot.

[ehorn]

I asked the pool builder and he said the same, just some plastic spray paint would work. Most plumbers carry a brown or some sort of neutral for the yard. He also recommended Krylon for Plastics.

Be sure to paint it soon, PVC will grey and become brittle pretty quickly. It can take as short as 3 - 6 months depending on where you live.

Eric