Too much salt?

[chem geek]

IF your pool is 20,000 gallons, every 50 lbs of salt you add should increase the salt level 30 ppm.

I believe this is a typo and should be "300 ppm" since 50 pounds of salt in 20,000 gallons raises the salt level by 300 ppm. So 9 bags each with 50# of salt would result in adding 2700 ppm of salt. Chris' initial salt level from the initial calcium hardness and pH adjustment is probably around 350 ppm so the total salt would be expected to be close to 3050 ppm (the salt test actually measures just the chloride ion level, but reports this as ppm sodium chloride "salt" equivalent).

Richard

[Poolsean]

Sorry, my bad. I have one of those DARN sticky keyboards!!! = P

Richard has corrected me...it is 300 ppm per 50lb bag in a 20,000 gallon pool.

You can calculate the approximate pool volume just by the increase in salt level for any pool.

Take your before and after salt levels, but remember to allow enough time for the salt to circulate throughout the pool before taking the "after" salt reading.

Plug in the results:
(3000/salt increase x amount of salt added) / 0.025 = pool volume in gallons

[chris_r11]

Thanks for all the suggestions. I guess I will get a Taylor salt test kit and see how the results come out.

It was a strip he used. he put the water and the test strip in some "device" and then took off for awhile. I was not really paying attention until he said the salt was at 5100 and I should drain half the pool.

Is the taylor k1766 (or something like that) the salt test kit to get?

Thanks!
Chris

[chem geek]

Is the taylor k1766 (or something like that) the salt test kit to get?

Yes, the Taylor K-1766 is the one to get.

[chris_r11]

Well, I received my Taylor kit yesterday and took a salt reading.

It came out to 4400. I remember the person that came out called in to the shop before adding the salt and I overheard him saying that there already was "salt" in the pool (he did a test) and how much should he add. They told him to add all 10, but he told me he stopped at 9 and I could add that one if necessary later.

So, I suppose my pool is somewhat smaller than 20K gallons but I don't know how much salt was in there from the city water and it being balanced.

with a salt level of 4400, should I just let it go through the winter and see if some gets washed out or should I try to correct it now? Who knows, maybe I will have to drain the pool during the downpore or 2 we usually get in January (I was promised an overflow, but they did not install one, but that is another story ).

Chris

[Socal_biker]

Well for 18 yrs I thought my pool was ~18K gallons.

Only this year did I measured the volume of water going in when I filled it last. It was actually ~15K.

[tphaggerty]

Not sure where you live. Here in the northeast, we will probably get between 15 and 20" of precip between now and opening in the spring, so if it was me, I would leave it!