I have been told that you can continually run water through the waterfall by turning off the pump and simply using the cyphoning method of running the pool water out the waterfall outlets. Has anyone did this or heard of this before?
Tropic
I have been told that you can continually run water through the waterfall by turning off the pump and simply using the cyphoning method of running the pool water out the waterfall outlets. Has anyone did this or heard of this before?
Tropic
Tropic, I've read and reread this post a few times and still am not sure what you are asking. By it's nature, a waterfall is above the pool (source) water, thereby syphoning is an impossibility. I also don't see how this relates to winterizing.
There is a fair chance that I've missed a fine point in what you posted, but I can't seem to make sense of your question.
Welcome to the forum and please let me/ us know a little more about what you're asking. Heaven only knows how many times I've posted what I believed to be a clear post only to reread it a day or so later and realised that I didn't express what I was trying to clearly![]()
Luv & Luk, Ted
Having done construction and service for 4 pool companies in 4 states starting in 1988, what I know about pools could fill a couple of books - what I don't know could fill libraries
I did some checking with my source that told me this when I was doing the pool. I was wrong on my thinking so now I'm back to trying to figure out how to make sure I get rid of all the water in the pipes of the waterfall to avoid damage during freezing. Thanks for your help.
Terry
Terry, you're on the right track in asking the question here. If you want to get the water out of any line; you have to have both ends of the line open - if one end is under water, you need to blow air through it until it bubbles (though splashes would probably be a better description) and plug it, WHILE IT'S BUBBLING. {the method has been talked about quite a bit on the forum, but if you need more info, just ask}. There are many ways that waterfalls are fed and feed into the pool, a few more specs on your system/ set-up would allow me/ us to give you 'pool specific' advice (knowing if there was a 'collection basin' or if the water just came up and poured down the trough (in which case, the water in the line would equalize to the pool water level - this may be what you were talking about in the original post
).
I hope that you are not discouraged (and pray that you are not put off on the forum) Please understand that there are sooo! many types of pools and plumbing methods, that a definative answer that covers every pool is imposible to give.
Luv & Luk, Ted
Having done construction and service for 4 pool companies in 4 states starting in 1988, what I know about pools could fill a couple of books - what I don't know could fill libraries
Thanks for taking the time to help me. I did my own pool as the GC and it turned out really nice (58,000 gal guinite w/pebbletec, diving board and waterfall etc..) but I'm not too good on the plumbing stuff and simply trusted the pool plumber company. Question: Would you recommend to simply call a pool service company to make sure it's winterized correctly? I have freeze protection control on my Jandy and was wanting to turn off the waterfall pump and clear out the lines so I could save on electricity this winter. Would you tackle this or hire somone to come out to be safe.
Thanks again!
Terry
Terry, it's my pleasure to take the time to help the people who post here - this site is GREAT!, it's helped me a lot and I try to give back whenever I can.
So what you're trying to do is winterize only one part of your system. I assume that the waterfall pump has one line in (suction) and one line out (the feed for the waterfall). It shouldn't be hard to winterize just those 2 lines, though it's a little more tricky to do it if the pump is below the pool water level. Also, where is the 'feed source' for the pump (it's usually a main drain but could also be a suction port in the wall)? If you want to DIY, this info will help me advise you better.
If you are worried that you may not do it correctly, call in the pool dudes, but schedual it for a time when you are home so you can see what they do (so you'll be able to DYI in the future). Don't be afraid to ask them questions, they are in your employ and should be more than willing to tell you what they're doing and, why! It would probably be money well spent, however they will most likely be there less than 10 min (to blow and antifreeze 2 lines).
Whichever way you decide to handle it, please let us know what was done - we like to hear back from the folks we help- Waste
Luv & Luk, Ted
Having done construction and service for 4 pool companies in 4 states starting in 1988, what I know about pools could fill a couple of books - what I don't know could fill libraries
Bookmarks