pump will only prime when basket it out

[ScottsdaleSwim]

Put a tachometer to the shaft of the motor and it's right around 3400 rpm and the motor is a 3450 1hp motor.

Blew the line with a hose through a chunk of noodle (works great btw) and had bubbles and water coming up through the drain. Also blew out the skimmer line. No bubbles. No chunks of leaves or debris came from either line.

So we turned the pump back on. I slid a cap over the drain while it was open. I could barely get it off the suction was so great. The pressure dropped all the way down to 5.

When the basket is out the pressure only increases by 1-2 psi. So psi is 13 to 14 with the basket out

Our old pressure was right around 15 now it's around 12 with the basket in.


The basket is becoming swiss cheese as we speak.

The thing is..isolating each line makes no difference in the pressure. Each isolation only drops the pressure by 1-2 psi. Close the drain, open the skimmer - no difference.
And the opposite is true. So it's not like we can even identify a problem in one line and not the other.

Can we just run the pump with the bubble? It's not a huge bubble, as you can kinda see from the photo.

I've included a photo of my hose apparatus..because I need to feel like I'm contributing.




sidenote...as I was uploading this photo my husband was calling our local pool store (they make me violent) to see if they have an impeller in stock (he thinks it's the impeller)..anyhow I was looking down at the computer and I said "lemme guess, he didn't know his a** from a whole in the ground." I looked up to see why he was hissing at me and he was still on the phone. oopsie!

I don't normally speak that way. I swear

[AndyT86]

Can we just run the pump with the bubble? It's not a huge bubble, as you can kinda see from the photo.

I run mine (a Hayward) with small bubble like that. It appeared a 2-3 years ago, and I figured as long as it was not cavitating it was okay.

Out of curiosity, have you changed any plumbing lately? Just wondering if there is a place in the plumbing that can trap the air that forms the bubble.

[ScottsdaleSwim]

Andy- I'm glad to hear that I can run it with the bubble.
My pool is starting to get yucky.

We haven't done any plumbing..we bought the house just over a year ago.

My husband picked up an impeller today from the pool store...and guess what?
It's the wrong one.
If the new impeller doesn't change things I'll "watch and wait" because frankly, this is makin' me nuts.

[MarkC]

My basket has a slot that has to be lined up with its mating twin in the basket housing itself. If I don't line them up the lid does not fit right. I know this is probably not your problem but was wonderring if the new basket does not have the slot cut into it that keys into the housing?

[ScottsdaleSwim]

It actually looks like it's going to be the impeller. We're waiting for it to come in but when we took the old one in..so they would be sure to order the correct one...
The guy said the impeller looked pretty worn.
He showed us how a new one should look and it definitely looked worn. It should be in tomorrow or wednesday so we'll see how it works when we put the new one on.