Results 1 to 5 of 5

Thread: Protecting buried PVC

Threaded View

  1. #2
    Join Date
    Apr 2006
    Location
    Scottsdale, Arizona
    Posts
    526

    Default Re: Protecting buried PVC

    I have mine covered with sod in some areas and 24" square pavers in the area around the pump equipment. They are very shallow as they get close to the equipment so I added a little sand under the pavers to cushion them a bit.

    as to the fear of someone jamming an umbrellla pole or volleyball fence into the ground, I had an issue with my sprinkler system and a tiki torch .. after patching the broken pipe , I split a piece of bigger PVC lenght ways and layed it over the sprinkler piping before covering it back up with dirt .
    Last edited by Phillbo; 10-03-2006 at 04:03 PM.
    14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7

Similar Threads

  1. Doughboy buried AGP
    By gemilina in forum Above-Ground Pool Construction & Repair
    Replies: 0
    Last Post: 04-20-2012, 12:21 AM
  2. Buried Pipe
    By BigDave in forum Above-Ground Pool Construction & Repair
    Replies: 2
    Last Post: 07-14-2011, 10:20 AM
  3. Protecting underground PVC
    By Elmer J Fudd in forum In-Ground Pool Construction and Repair
    Replies: 3
    Last Post: 12-01-2007, 11:35 AM
  4. Constuction advice - protecting coping
    By BillF99 in forum In-Ground Pool Construction and Repair
    Replies: 2
    Last Post: 01-24-2007, 07:36 PM
  5. Protecting/Covering a Pump/Filter during use
    By NWMNMom in forum Above-Ground Pool Construction & Repair
    Replies: 4
    Last Post: 06-08-2006, 04:25 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts