+ Reply to Thread
Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 31

Thread: Geralde Pool build

  1. #1
    Join Date
    Aug 2006
    Location
    NJ
    Posts
    25

    Default Geralde Pool build

    Good morning all. Since I started my pool building process, this forum has been extremly helpful. I love seeing the progress pics. So I thought I would give back a bit and show you mine :-)

    Pool is moving right along, they dug on 9/21. Rebar on 9/22....gunite on 9/26. Tile and coping today..
    Attached Images

  2. #2
    Join Date
    Aug 2006
    Location
    NJ
    Posts
    25

    Default Re: Geralde Pool build

    Here are the others..sorry :-)
    Attached Images

  3. #3
    Join Date
    Jul 2006
    Location
    Pearland, TX (Houston suburb)
    Posts
    89

    Default Re: Geralde Pool build

    Nice layout. Looks like things are moving right along for you as well. Not much yard left to mow, huh??? What are the specs on your pool? Keep the pics coming.

  4. #4
    SeanB. is offline --General User-- Weir Watcher SeanB. 0
    Join Date
    Aug 2006
    Location
    Missouri City, Texas
    Posts
    207

    Default Re: Geralde Pool build

    Nice. What is the are on the lower left in the last picture going to be? Is that a beach entry? I see steps on the opposite side.
    Site owner -- www.troublefreepool.com

  5. #5
    Join Date
    Aug 2006
    Location
    NJ
    Posts
    25

    Default Re: Geralde Pool build

    it is a Play pool. It is 18inches deep...about 100 Sq Ft. We think that is where I will be spending alot of time with a cooler :-)

    The pool is a A&S 700SqFt Mountain Lake. Approx 22x42. That is not including the playpool.

    Looks like I will be getting Tile and Coping tomorrow. Decking later this week.

    Here is a better pic of the play pool.
    Attached Images

  6. #6
    SeanB. is offline --General User-- Weir Watcher SeanB. 0
    Join Date
    Aug 2006
    Location
    Missouri City, Texas
    Posts
    207

    Default Re: Geralde Pool build

    Quote Originally Posted by geralde View Post
    it is a Play pool. It is 18inches deep...about 100 Sq Ft. We think that is where I will be spending alot of time with a cooler :-)

    Great idea. My four year old would love an area like that.
    Site owner -- www.troublefreepool.com

  7. #7
    Join Date
    Jul 2006
    Location
    Pearland, TX (Houston suburb)
    Posts
    89

    Default Re: Geralde Pool build

    [QUOTE=geralde;39183]it is a Play pool. It is 18inches deep...about 100 Sq Ft. We think that is where I will be spending alot of time with a cooler :-) /QUOTE]

    Geralde, Great idea. We did a little version of what you have (4ft x 9ft). We refer to it as our tanning ledge. Are you putting any circulation in the area? I did not see any stub-outs. We installed a "bubbler" fountain to help keep the debris off of the landing. I also installed an umbrella holder as well. Here is the shot of ours.

    http://i112.photobucket.com/albums/n...1/06092357.jpg

  8. #8
    Join Date
    Aug 2006
    Location
    NJ
    Posts
    25

    Default Re: Geralde Pool build

    Just wanted to post a few updates. Tile and Coping are done. Electric was done yesterday..and decking will be done Monday. Moving right along :-)


  9. #9
    Join Date
    May 2006
    Location
    Sugar Land, Texas
    Posts
    183

    Default Re: Geralde Pool build

    Looks terrific!
    Pool owner - contract signed 21Aug2006; HOA approval granted; complete - existing patio demolition; excavation; rebar; embedded plumbing; gunite; plumbing; electrical; tile and coping; decking; plaster; pool fill; acid start-up; regular start-up; pool school; gas meter upgrade; additional of salt; PDA remote programming.

  10. #10
    Join Date
    Jul 2006
    Location
    Pearland, TX (Houston suburb)
    Posts
    89

    Default Re: Geralde Pool build

    Geralde,

    I saw your post on Sean B.'s thread. I wanted to put my two cents in on the exposed aggregate. Pea Gravel is great as long as the builder installs the correct grade of gravel. I am attaching a picture (not the best quality) of my folks pool in Seabrook, TX. They have pea gravel with the flagstone inlay. Hope this gives you some ideas.


    Last edited by divnkd101; 10-06-2006 at 11:23 AM.

+ Reply to Thread

Similar Threads

  1. Want to build my own pool
    By fta123 in forum In-Ground Pool Construction and Repair
    Replies: 1
    Last Post: 06-16-2011, 08:41 PM
  2. Roger's Pool Build
    By 26theone in forum In-Ground Pool Construction and Repair
    Replies: 11
    Last Post: 04-22-2007, 07:01 PM
  3. Advice on new pool build
    By mdemers in forum In-Ground Pool Construction and Repair
    Replies: 3
    Last Post: 03-20-2007, 01:41 PM
  4. Divnkd101 Pool Build
    By divnkd101 in forum In-Ground Pool Construction and Repair
    Replies: 47
    Last Post: 10-19-2006, 09:54 PM
  5. Build your own Gunite Pool
    By sambuca169 in forum In-Ground Pool Construction and Repair
    Replies: 15
    Last Post: 04-30-2006, 11:05 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts