(30000 Gallon, 20x40, Vinyl IG pool.... Just moved into this house on 7/1 and this is my first pool.)

We are in the process of remodeling around the pool and renovating the landscaping so my pool kind of got out of hand. By out of hand, I mean the bottom and sides were covered with a greenish-yellowish slime, at least it was as far as I could tell... I couldn't see the bottom in the deep end.

For 3 days or so, I dumped 10 gallons of bleach in the pool. I also put 6 3" tablets of chlorine in the chlorinator and turn it all the way up. I can see the bottom of the pool now, but it doesn't look like all the algae is dead.

At this point, I am just trying to get my pool back "in shape" so that I can close it down. I just tested the water and here are my numbers:

FC 2
TC 3
Ph 7.0
TA 100-110
CYA 65

I am sort of stalled here... What do I do now.... Get my pH up? If my limited knowledge is correct, don't I need to raise my pH up before anything? Then adjust my TA, then chlorine?

Is there, somewhere on this forum, a step-by-step guide on what to do, the order in which to do it, and how to do it (i.e. add X pounds of baking soda to raise TA by Y amounts etc. )?

Thanks,
Ed