Results 1 to 10 of 13

Thread: zero stabilizer devouring cl?

Threaded View

  1. #10
    duraleigh Guest

    Default Re: zero stabilizer devouring cl?

    Hey, Michael,

    Actually, I may be all screwed up on that CYA dose. I looked at the chart for CYA dosage on that website I like and it calls for 1.25 lbs to bring 12,000 gal up to 40. It didn't seem like enough to me so I just rechecked and that's what it says. I know your Calc calls for 3 lbs. I've only added CYA twice to my pool ( used the dose off the side of the box ) but 3 lbs seems more reasonable than 1.25.

    Here's the website: http://www.deh.enr.state.nc.us/ehs/chem.htm#ta

    I'm gonna check some other numbers and try to sort this out.

    Well, I just looked more carefully and the chart for CYA on the NC website is bogus. It looks like portions of the table are reversed where they actually call for LESS CYA to increase by 30 than to increase by 40!!. Obviously they transposed some numbers.

    As always, trust Michael's calculator
    Last edited by duraleigh; 04-22-2006 at 08:48 PM.

Similar Threads

  1. Is stabilizer necessary?
    By JimK in forum Using Chlorine and Chlorinating Chemicals
    Replies: 24
    Last Post: 05-29-2012, 06:48 PM
  2. How Much Stabilizer
    By jhk49 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 1
    Last Post: 05-16-2012, 02:11 PM
  3. Stabilizer
    By cooper in forum Using Chlorine and Chlorinating Chemicals
    Replies: 6
    Last Post: 05-30-2011, 09:26 PM
  4. Stabilizer
    By Calcutta in forum Testing and Adjusting Pool Water Chemistry
    Replies: 9
    Last Post: 03-26-2008, 10:31 PM
  5. Stabilizer
    By mackeeg in forum Using Chlorine and Chlorinating Chemicals
    Replies: 9
    Last Post: 06-17-2007, 12:16 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts