+ Reply to Thread
Results 1 to 5 of 5

Thread: QUESTION About Vacuuming "TO WASTE"

Hybrid View

  1. #1
    PopcornGirl is offline ** No working email address ** Thread Analyst PopcornGirl 0
    Join Date
    Mar 2006
    Location
    Baton Rouge, LA
    Posts
    70

    Default Re: QUESTION About Vacuuming "TO WASTE"

    Thanks, SJ!
    Well, I did it.
    I opened the drain faucet (and it really is just that: a faucet like you would see on the side of your house) and vacuumed and my filter pressure does not appear to have gone up at all, so maybe most of the waste went out of the line.
    I really hope so because I just brushed down the walls again and I will definitely have to repeat this whole process tomorrow!
    Thanks again,

  2. #2
    duraleigh Guest

    Default Re: QUESTION About Vacuuming "TO WASTE"

    Hi, Summer,

    Your dedication to keep your pump running 24/7 is terrific. Again, your willingness to stick with it 'til your water clears shines thru!!

    That said, it would not be a killer if you shut down for several hours to clean your cartridge. Just don't do it IMMEDIATELY after you've added bleach. You could bring your Cl back up to 20ppm (have you heard that before? ), then run the pump for maybe another 20-30 minutes to distribute the Cl and then shut 'er down.

    That's a good idea to vacuum with that valve open. You're gettin there!!

    Dave S.

  3. #3
    PopcornGirl is offline ** No working email address ** Thread Analyst PopcornGirl 0
    Join Date
    Mar 2006
    Location
    Baton Rouge, LA
    Posts
    70

    Default Re: QUESTION About Vacuuming "TO WASTE"

    Thanks, Dave! That's good to know.

    I'm really starting to get the hang of this (I love that bleach calculator!)... And you should see my pool... it's starting to look GOOD again!
    I'll post a pic once it's completely clear.

+ Reply to Thread

Similar Threads

  1. Multi-Port Does NOT have a "Waste" setting
    By trickedout in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 08-09-2012, 03:55 PM
  2. Newbie just beginning to understand "free" and "total" chlorine. . .
    By Hainsworth in forum Testing and Adjusting Pool Water Chemistry
    Replies: 14
    Last Post: 06-30-2012, 10:17 AM
  3. Can a leaking Jandy "Check Valve" with clear top be "fixed"?
    By 105ex in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 05-29-2010, 08:17 AM
  4. Esther Williams "Millenium" Pool Install "issue"
    By mrpurrhead in forum In-Ground Pool Construction and Repair
    Replies: 3
    Last Post: 06-12-2006, 10:34 PM
  5. "Throttle down" on vacuum to waste?
    By kevreh in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 2
    Last Post: 05-24-2006, 08:50 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts