Backwash hose ideas??

[Pool_Mike]

My hose for my backwash popped about a week ago, but that was the pbs fault. Now my hose is only 12' long.

I need at least 25' of hose to run it to the back of my yard, which on the other side is a city drain system. Any ideas on what-else to use then a backwash hose?? Seem the hose goes zippy like a wild snake. I was told to try the PVC pipe methood. Any ideas??

[KurtV]

Fire hose. Available on Ebay. This thread explains the thread issue (pun fully intended).

[Pool_Mike]

Kurt,

Thanks. Will read all of that.

It was funny today, since the hose was only about 12' long and then backwashing I was soaked and so was the property fence. I could not hold it and just let is spray like crazy for about minute or two. lol

[Davenj]

I ran about 150' of 2" PVC. Ran around along the fence on the ground to the side walk. I had a screw on coupling to add a 10' piece to reach the curb. I recently burried it and put a black drain box on the end at the side walk. This way I can hook a piece on the pipe with a coupling to span the distance to the curb. Drain box has holes in the bottom with rock in it. So the pipe can drain when disconnected and there is no standing water. I connected the pipe to the filter with a piece of reinforced hose.

[Pool_Mike]

Davenj,


PVC is really my idea and to run it also along the fence and run it off into the ditch behind our privacy fence.

If you are using 2" pvc, what kind of coupling/attachment did you use to securely attach it to the valve?
Thanks

[Phillbo]

Mine is plumbed into the sewer line but I have seen set ups where the line is run to the cleanout. Is that an option for you ?