+ Reply to Thread
Results 1 to 3 of 3

Thread: Purge from solar shuts down gas heater

Hybrid View

  1. #1
    mas985's Avatar
    mas985 is offline Lifetime Member Whizbang Spinner mas985 3 stars mas985 3 stars mas985 3 stars
    Join Date
    Dec 2004
    Location
    Pleasanton, CA
    Posts
    1,423

    Default Re: Purge from solar shuts down gas heater

    If you have a three way valve controlling the solar, can you adjust the stop to allow some of the water to bypass the solar and keep a small amount of water flowing through the heater. This will also reduce the pressure in the panels and head loss in the system both of which are good things.
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

  2. #2
    Join Date
    Dec 2004
    Location
    Poughquag, New York, USA.
    Posts
    231

    Default Re: Purge from solar shuts down gas heater

    Or, if you have a solar controller, put it in "test" or "on" mode. Then it won't turn on and off based on the sensor, it will just stay on. Then, when the sun is off the panels, turn it back to "auto". Just don't forget to turn it back or you'll cool the pool at night!

+ Reply to Thread

Similar Threads

  1. Heater shuts down after 30 seconds
    By Yellowdog in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 05-14-2013, 09:46 PM
  2. Pool pump making humming noise then shuts off
    By Campbell in forum Pool Equipment & Operations
    Replies: 5
    Last Post: 10-30-2012, 11:36 PM
  3. Replacing Solar thermal and natural gas with Solar PV and electric pool heater
    By California Newbie in forum Pool Equipment & Operations
    Replies: 5
    Last Post: 05-26-2012, 08:14 PM
  4. Removing heat pump/purge air?
    By DanS in forum In-Ground Pool Construction and Repair
    Replies: 3
    Last Post: 09-09-2009, 11:59 AM
  5. Solar Heater ?
    By kevincad in forum Pool Equipment & Operations
    Replies: 10
    Last Post: 04-21-2006, 12:27 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts