Polaris 150

[Pool_Mike]

The RED area is what area it cleans.

[Pool_Mike]

well I did some mods to the weights for the hoses. It seems to work better. It just weird that once all the small dirt in sucked up and by the end of the day and when the timer goes off and shuts all equipment down.

By the next day startup, it seems the dirt still is in there by the returns spitting it back out.

It is just weird that I already backwashed and rinsed about 2 weeks ago and this crud is happening again. I am really wondering if my filter sand is spitting the crap back into my pool.

Any takers to know why??

I am wondering if I should trash the zeobrite and put in sand.

[waste]

Mike, before you dump the Zeo, check the gasket in the multiport

[Jeffski]

Mike - I am convinced that my filter spits the dirt back into the pool as well. In fact as you vacuum you can see it shooting from the outlets.

[Pool_Mike]

Shucks!!!

I am really considering getting a POOL ROVER PLUS now. I feel that this 150 is not good. Sometimes it just stays in one spot like it stuck and yet have i seen it go down the middle of my pool (by the drains or any where in the middle) and clean that dirt there. Also I leave it in for 3 hours and all it does is cicle my pool

I plan to call Polaris and complain, maybe see if they can do a customer satisfaction swap for my 150 for credit and buy up for the RV. If not, I will put this on ebay for next year and get the rover plus this year.