How to replace wall fitting?

[waste]

This may be a little late, I didn't get a chance to log on yesterday (MIL in town overnight). Yes it's SP 1408, and any pool store that hase liner pool supplies should have one you can buy, without having to get the whole fitting.
Durring the short time it takes to remove the old faceplate and install the new one, some water will leak - but the force of the water in the pool will keep the liner ~sealed to the wall, so the amount lost is negligable. Good luck with the change out, if you need any more help or have more ?s, feel free to ask.

[brian11]

Thanks, I changed them this weekend, no problems.

I had another issue though. For some reason when blowing out my lines, my Shop Vac would not blow out the furthest return this year. (It has done it in years past). Long story short, called local pool guy to blow out the lines.

He had a cyclone blower. He also had a special attachment that hooked right up to the pump by replacing the clear plastic on the pump.

I have done some searches online and see the cyclone comes in different Horespower. What HP would you recommend for a 20*40 (27,000) I/G? They have a 3.0 & 2.75 for lower cost:

http://cgi.ebay.com/ws/eBayISAPI.dll...&category=3243

Also, do you know where I can purchase the "special" attachment?

It might be worth the investment to split with my brother who also has a pool.

[waste]

Brian, (it must be something about you) - funny thing , we just purchased a 2.75 hp cyclone vac /blower for doing closings! (I had never heard of Cyclone vacs prior to this). The 2.75 hp should have more than enough power to do your pool.
As for the 'special attachment', I don't know if they're sold, we made our own. It's a regular superpump lid that we drilled a 3" hole in, using the hole saw we use on our pools to add extra suction and return lines. We then put an AG pool return fitting in the hole and screwed in a SP1091-Z-7 backwash adaptor. This should be pretty much what your pool dude used. With the multiport on 'recirc', you should be able to blow all the lines, though you may have to play with the valves a little to get the pressure right. As this is something you won't need til next year, do some more price shopping to hopefully reduce the cost some. Have a great winter!

[brian11]

Watse, where did you purchase your Cyclone from? Who manufactures them?

[waste]

Brian, I'm not sure, it appeard one day a couple of weeks ago on one of the construction crews' trucks. It had not been 'adapted' for the suction hoses we use to drop liners, so I gave them the 'box style' one we'd been using in exchange, which was ready to do liner drops. I'll try to remember to ask where it came from and see if I can't get a look at the manual for it(7 am isn't the time to get the 'best results' out of my brain ). If I can get the manual, I'll copy the pertinent info and let you know.