+ Reply to Thread
Results 1 to 10 of 10

Thread: When to let Cl come down after opening

  1. #1
    Davenj is offline Lifetime Member Thread Analyst Davenj 0
    Join Date
    Dec 1969
    Location
    Jersey Shore
    Posts
    100

    Default When to let Cl come down after opening

    I got the ph at 7.2, alk 90, cya 60 and got the cl to 15ppm. Kept it there for 36 hours, brushing and backwashing. Water is pretty clear a little cloudy in the deep end. The cl level stayed at 15ppm for about 20hrs, do I let the level come back down to 5ppm now. Have a SWG but its off for now.

  2. #2
    duraleigh Guest

    Default Re: When to let Cl come down after opening

    Hi, Dave,

    the definitive, absolute answer is maybe!!

    It sounds like your pool is pretty cleaned up but the best way to find that out is to have a test kit that tests for Combined Cl. If you CC test greater, than .5ppm, you need to bring it back up to around 20. (With a CYA test of 60, you may have needed to bring your Cl up to 20 to reach breakpoint....shock).

    If your CC is less than .5 however, you're good to go.


    Dave S.

  3. #3
    kevincad is offline Registered+ Thread Analyst kevincad 0
    Join Date
    Dec 2004
    Location
    Snellville, Georgia, U.S.A..
    Posts
    71

    Default Re: When to let Cl come down after opening

    Quote Originally Posted by Davenj
    I got the ph at 7.2, alk 90, cya 60 and got the cl to 15ppm. Kept it there for 36 hours, brushing and backwashing. Water is pretty clear a little cloudy in the deep end. The cl level stayed at 15ppm for about 20hrs, do I let the level come back down to 5ppm now. Have a SWG but its off for now.
    If I have a problem like that, I keep mine up until the water is crystal clear again, regardless what the CC is, but that's just me. Dave's suggestion is true, however. I just like to keep mine up until I'm sure of things!!

  4. #4
    Davenj is offline Lifetime Member Thread Analyst Davenj 0
    Join Date
    Dec 1969
    Location
    Jersey Shore
    Posts
    100

    Default Re: When to let Cl come down after opening

    This is were i'm at tonight:
    FC-15
    CC-0
    ph-7.2
    alk-115
    cya-60
    ch-210
    salt-3000
    temp. 68
    Is there anything I need to change. I have a IG vinyl, heater also.
    Thanks,
    Dave

  5. #5
    duraleigh Guest

    Default Re: When to let Cl come down after opening

    Quote Originally Posted by Davenj
    This is were i'm at tonight:
    FC-15
    CC-0
    ph-7.2
    alk-115
    cya-60
    ch-210
    salt-3000
    temp. 68
    Is there anything I need to change. I have a IG vinyl, heater also.
    Thanks,
    Dave
    Hi, Dave,

    Yeah, your gonna need to change something......Clear out an extra shelf in the fridge and put more beer in it....you'll need it this Summer because your pool is virtually perfect and your buddies will all be over for a swim!!


    Dave S.

  6. #6
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: When to let Cl come down after opening

    If your pool isn't clear, then keep at it. Is the cloudiness white or brown? Are you vacuuming and brushing everyday? (until the pool is good to go)
    Carl

  7. #7
    Davenj is offline Lifetime Member Thread Analyst Davenj 0
    Join Date
    Dec 1969
    Location
    Jersey Shore
    Posts
    100

    Default Re: When to let Cl come down after opening

    Just a slight haze that is only you can only see in the deep end. I would say its white. Brushing daily, was vacuuming but put the dophin in last night and will continue with that.

  8. #8
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: When to let Cl come down after opening

    Between the dolphin and a couple of days it should clear...then you'll be OK.

    White haze usually means something besides algae--or dead algae. Is your calcium high?
    Carl

  9. #9
    Join Date
    Dec 1969
    Location
    Katy, TX
    Posts
    336

    Default Re: When to let Cl come down after opening

    I'd bump your salt level up to 3200, for the start of the season. My calculator will help you figure how much salt you'll need . It's in my sig below.

    Michael

  10. #10
    Davenj is offline Lifetime Member Thread Analyst Davenj 0
    Join Date
    Dec 1969
    Location
    Jersey Shore
    Posts
    100

    Default Re: When to let Cl come down after opening

    CarlD, calcium is at 210
    mwsmith2, have been usiing your calc., works great and makes life alot simpler. Thank you by the way.
    Dave

+ Reply to Thread

Similar Threads

  1. Help with opening up a !0,100 gal AGP
    By yardbird in forum Using Chlorine and Chlorinating Chemicals
    Replies: 8
    Last Post: 08-27-2012, 09:00 PM
  2. CYA at opening
    By PBLsQuad450 in forum Using Chlorine and Chlorinating Chemicals
    Replies: 3
    Last Post: 05-16-2011, 08:48 PM
  3. Will I need vac for opening?
    By poolbee in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 3
    Last Post: 04-21-2007, 01:04 PM
  4. Low pH upon opening
    By kacy in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 2
    Last Post: 05-11-2006, 09:14 AM
  5. Opening Day
    By TwistyKat in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 11
    Last Post: 05-06-2006, 07:46 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts