Scaling can also be caused by a high PH level. I know when the pool builder added salt and turned on the SWCG I added about 2 gallons of acid over the next 2 weeks just to keep the PH below 7.8.
Re: SWG Cell.
Scaling can also be caused by a high PH level. I know when the pool builder added salt and turned on the SWCG I added about 2 gallons of acid over the next 2 weeks just to keep the PH below 7.8.
Completed 8/21/06
14,000 gallon 3'-6' concrete pool with Diamond Brite
Spa with spillway
250K BTU gas heater (for spa)
SWCG - Aqua Rite
Hayward Super II Pump - Cartridge filter
See pictures here http://www.philsimmons.com/family/ga...mages&keyword=
Re: SWG Cell.
The white on the plates of the cell is calcium. It is normal for the calcium to plate out on the cathode. There is nothing to be concerned about unless it builds up enough to fill the space between the plates. I am sure that your owners manual explains how to clean the cell if the buildup get to be too much.
Mark Manning
Watermaid Canada
www.watermaid.ca
mark@watermaid.ca
Posting Permissions
Reply With Quote
Bookmarks