
Originally Posted by
rtpatter
I opened my pool last Thursday to find a giant green mess underneath the loop loc cover. Algea and pollen everywhere. I basically just started pounding away with bleach along with a couple of tabs in the skimmer. I vaccumed a few times and have scrubbed the walls. The progress over the first 2 days was pretty good it went from dark green to blue and I could start to see the main drain. However after about two days it has leveled off and does not appear to be clearing anymore. I remember when I did the switch from Bauqa it only took about six days to have crystal clear water. I have tested the water and keep the FC around 10 - 15 my PH is at 7.2 and the CYA level is currently around 20 so I figure its ok to continue to use the combination of Bleach and tabs for the moment. The sand was changed in the middle of last year and I used bleach succesfully for the last few months before I closed. I'm wondering if something happened over the winter that affected my filter. How can I tell if the filter is working properly? The pressure does steadily rise after I backwash so I assume it working correctly. I'll post some pictures later to better illustrate but should I just continue to hammer away with bleach or do I have another problem?
Bookmarks