Results 1 to 2 of 2

Thread: Can't get backwash to fully close

Threaded View

  1. 09-14-2006 09:43 PM #1
    slater1182
    slater1182 is offline Registered+ slater1182 0
    Join Date
    May 2006
    Posts
    30

    Default Can't get backwash to fully close

    I have a twist up or twist down backwash unit.

    I fully pull up and twist to turn off. 10% of water still flowing thru the "see thru" pipe. Picture attached.

    Any ideas on how to get this unit to fully close.

    thanks,
    scott
    Last edited by slater1182; 02-04-2007 at 10:14 AM.
    Reply With Quote Reply With Quote
« Turbo cell failing? | Pump motor dying - upgrade needed? »

Similar Threads

  1. Calcium Hypochlorite doesn't fully dissolve
    By dgcpe in forum Using Chlorine and Chlorinating Chemicals
    Replies: 3
    Last Post: 05-23-2013, 12:43 AM
  2. ICE Level getting too close! HELP
    By jmjbj_h in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 9
    Last Post: 02-23-2007, 12:52 PM
  3. Want to close but new problem
    By CoffeeBean in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 0
    Last Post: 10-07-2006, 07:50 AM
  4. To close or not to close ?
    By rtpatter in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 5
    Last Post: 10-03-2006, 03:11 PM
  5. When to close??
    By poolmom06 in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 6
    Last Post: 08-18-2006, 06:38 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules