+ Reply to Thread
Results 1 to 7 of 7

Thread: How to attach 52" ladder to 48" pool

Hybrid View

  1. #1
    Join Date
    Dec 1969
    Location
    Attleboro, MA.
    Posts
    160

    Default Re: How to attach 52" ladder to 48" pool

    Well this morning I cut off about 3 1/2" off the bottom of the ladder, reinstalled the bottom stair, did the same on the other side of the ladder and now it sits about 1/4" higher than the pool. Hopefully that's solved the problem. Should I still anchor the ladder to the pool with bolts?
    Nicole: 18' round AG with AstralPool Sand Filter and 1.5hp AstralPool Pump

  2. #2
    Join Date
    Apr 2006
    Location
    Apache Junction, Az
    Age
    70
    Posts
    475

    Default Re: How to attach 52" ladder to 48" pool

    That sounds a lot better, and yes I would use bolts.

    Best of luck, Dennis
    AG pool installer
    Arizona

+ Reply to Thread

Similar Threads

  1. Newbie just beginning to understand "free" and "total" chlorine. . .
    By Hainsworth in forum Testing and Adjusting Pool Water Chemistry
    Replies: 14
    Last Post: 06-30-2012, 10:17 AM
  2. Can a leaking Jandy "Check Valve" with clear top be "fixed"?
    By 105ex in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 05-29-2010, 08:17 AM
  3. Weight down "wedding cake" ladder
    By cheriberi in forum Pool Equipment & Operations
    Replies: 7
    Last Post: 06-11-2007, 10:57 AM
  4. Changing AG pool depth from 52"-54" to 46"-48" for kids (shallow end tricks)
    By zephans in forum Above-Ground Pool Construction & Repair
    Replies: 9
    Last Post: 06-02-2007, 11:28 AM
  5. Esther Williams "Millenium" Pool Install "issue"
    By mrpurrhead in forum In-Ground Pool Construction and Repair
    Replies: 3
    Last Post: 06-12-2006, 10:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts