Results 1 to 7 of 7

Thread: How to attach 52" ladder to 48" pool

Threaded View

  1. #5
    Join Date
    Dec 1969
    Location
    Attleboro, MA.
    Posts
    160

    Default Re: How to attach 52" ladder to 48" pool

    We have made the ladder as small as it will go by using those bolts at the bottom. Our pool isn't level with the ground so that could be part of the problem. I guess I could cut the bottom of the ladder and make my own holes and then recut the PVC on the outside.

    How about using a 4X4 underneath the ladder to allow the ladder to rest upon that?

    Are the ladders supposed to be attached to the pool or just resting on top of the top of the pool?

    The top of our pool measures around 44".
    Last edited by nicole12; 09-09-2006 at 07:54 PM.
    Nicole: 18' round AG with AstralPool Sand Filter and 1.5hp AstralPool Pump

Similar Threads

  1. Newbie just beginning to understand "free" and "total" chlorine. . .
    By Hainsworth in forum Testing and Adjusting Pool Water Chemistry
    Replies: 14
    Last Post: 06-30-2012, 10:17 AM
  2. Can a leaking Jandy "Check Valve" with clear top be "fixed"?
    By 105ex in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 05-29-2010, 08:17 AM
  3. Weight down "wedding cake" ladder
    By cheriberi in forum Pool Equipment & Operations
    Replies: 7
    Last Post: 06-11-2007, 10:57 AM
  4. Changing AG pool depth from 52"-54" to 46"-48" for kids (shallow end tricks)
    By zephans in forum Above-Ground Pool Construction & Repair
    Replies: 9
    Last Post: 06-02-2007, 11:28 AM
  5. Esther Williams "Millenium" Pool Install "issue"
    By mrpurrhead in forum In-Ground Pool Construction and Repair
    Replies: 3
    Last Post: 06-12-2006, 10:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts