Algae problem at my workplace..but not in a swimming pool!!

[drumr]

Just an update:
I have been watching these things for the last few weeks to see how effective they are. I have to say they are working...somewhat. We have 2 of them on our rinse tanks and they are probably 85% to 90% effective. They are not getting all of the algae, but enough of it to where we aren't constantly dumping the water and refilling. So they are effective enough for us to get production through without having these tanks cause problems with the aluminum extrusions.

Thank you haze on your input. I would also love to hear from waterbear or chemgeek to see what y'all think.

JD

[chem geek]

Well, we know that Borates (Boric Acid or Sodium Tetraborate / Borax) at a level of 50 ppm (Boron) will inhibit algae growth so that seems like one possibility. I can't guarantee that the Boric Acid won't cause harm, but it certainly won't be an oxidant like chlorine. I also assume you would adjust your water pH to be around 7 or wherever you want it, but slightly alkaline to avoid metal corrosion.

If you are getting lots of algae growth, then whatever it is you are rinsing (such as the additive) must also be providing nitrates, phosphates and sulfur (sulfates) because all three are needed (plus some light) for algae to grow. Clearly the sulfuric acid provides sulfates so perhaps the chemical additive is providing nitrates and phosphates. You probably can't do anything about what you are rinsing, but you can control light in the tank. Perhaps keeping the tanks dark plus the use of Borates will be all that is needed for this algae problem.

Anyway, that's my two cents -- for what it's worth.

Oh yes, as for the zeta rod, it makes sense though they make it sound so much more mysterious than it actually is. Essentially the basic principle is simply to put strong charges on anything suspended in the water, and that would include algae, and this prevents them from clumping together or sticking to the sides of the tank since like charges repel each other. It doesn't seem to kill what is in the water, but prevents it from forming colonies -- perhaps such lonely algae and bacteria don't replicate as well all by themselves (just kidding, but not having them settle, clump or attach would mean that any such growth would be minimal with decent flow rates).

Richard

[drumr]

Hello All,
I thought I would post an update on our zeta rods we are using at work. I kinda forgot about them until the other day (I actually don't work in that department, my boss is over it though.) I went over and took a look at them and they are looking a little worse for the wear. We have 2 installed and it looks like 1 of them is broken because the power supply is unhooked to it which leaves us with the 1. I asked my boss how they were doing and he commented they just half*** work. He said they do help some, but they are not the "miracle cure" that the website seems to evoke. The additive we use in our anodizing tanks have some sort of "sugars" in them and algae seems to thrive off of it. So we are constantly having to decant that tank to keep algae at bay. I guess that's the cost of more production .