+ Reply to Thread
Results 1 to 10 of 27

Thread: Is It Normal For New New Ig Vinyl Pool To Be Slightly Unlevel?

Hybrid View

  1. #1
    Join Date
    Jul 2006
    Location
    Arkansas
    Posts
    146

    Thumbs up Re: Is It Normal For New New Ig Vinyl Pool To Be Slightly Unlevel?

    Thanks Waste. We reshot the pool from several points. It is from 1/4" off to 1/2" off in places. PB claims that it is only 1/4" off with his level. Hydra Pools tech department feel as you do that structurally the pool should be fine. I agree, now is the time to do a quick fix, if we are going to, but hubby thinks the PB will walk off the job. PB told hubby today that we questioned and second guessed him more than any customer in 30 years, and that he has never wanted to walk off a job any worse than he has ours . This intimidated hubby dear. So, I think DH plans to let PB continue to work and complete the job-- then address any complaints. I will try to change his mind and get him to ask about putting shims in the coping. DH doesn't want PB to quit before we get our mechanical equipment and 1000 sq ft of concrete decking. We will owe him a few thousand bucks when he is finished, but if my husband will let me, I will negotiate a lesser fee because of the appearance loss. If the liner didn't draw attention to the lack of level, it would be a mute point. But it does, and I think we at least need compensation for that. Thanks for giving me ideas on what is a fair amount. I will keep you posted. Anyone out there got any suggestions for what to use for shims? This forum is tops!
    Last edited by webfeet; 09-06-2006 at 11:30 PM.

  2. #2
    Join Date
    Dec 1969
    Location
    PA.
    Posts
    18

    Red face Re: Is It Normal For New New Ig Vinyl Pool To Be Slightly Unlevel?

    Maybe you could get them to put in a different style liner without a border so that the waterline difference wouldn't be so noticeable. Just a thought.....
    Boby

  3. #3
    Join Date
    Jul 2006
    Location
    Arkansas
    Posts
    146

    Default Re: Is It Normal For New New Ig Vinyl Pool To Be Slightly Unlevel?

    I have thought of that, and I think it makes a lot of sense. That is something that could be done after the project is completed- which is when DH wants to address the issue again. So maybe we will ask PB for a new liner or the 2500.00 and see what he says. He's afraid that if the PB gets to trying to shim the coping that he will get it out of whack even more.

  4. #4
    tenax is offline Registered+ Widget Weaver tenax 0
    Join Date
    Jun 2006
    Posts
    445

    Default Re: Is It Normal For New New Ig Vinyl Pool To Be Slightly Unlevel?

    can you "hold" the money you owe him subject to satisfactory conclusion? you might want to consult a lawyer to make sure you're covered..that's what i would do.

+ Reply to Thread

Similar Threads

  1. Pool Water slightly yellow
    By watergirl101 in forum Pool Chemistry for Intex-type Pools
    Replies: 4
    Last Post: 06-12-2013, 06:12 PM
  2. Appropriate Water Level for Unlevel Pool
    By jachol in forum Intex-type Pool Setup & Operations
    Replies: 3
    Last Post: 06-02-2013, 06:43 PM
  3. slightly green slightly cloudy
    By jupitersen in forum Dealing with Algae & Slime
    Replies: 2
    Last Post: 08-14-2011, 02:24 PM
  4. How to repair an unlevel pool
    By Stevo in forum In-Ground Pool Construction and Repair
    Replies: 2
    Last Post: 06-02-2010, 03:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts