Is It Normal For New New Ig Vinyl Pool To Be Slightly Unlevel?

[webfeet]

I really think the pool walls are unlevel. The skimmers look the same distant below the coping, and I measured the waterline from the coping and it is about 3/4" different at each end. The deck has not been poured, but the PC has started the backfill. He plans on washing it in tomorrow and rebackfilling before he levels and builds the forms for the deck. He gave us permission to swim in it this holiday week end. The skimmers and filter are not working yet, but the pump is circulating the water. When ever I mention a concern to the PC he says that I worry too much. I have some other issues to address with him, but it is uncomfortable, and I feel like I am being hard to please. For example, I have been disturbed that the poolcrete surface is rough in several places, which I mentioned to him, and at his and Waste's advice I rubbed over the rough spots with my thumb, many of the rough areas do not flatten out, but remain. I have also found some small low areas, about the size of half dollars or a little bigger, under the liner. I mention the rough spots on a separate post, but if you have any advice on how to handle these issues, please tell me. I want to be fair, but I want what I paid for- a professional installation. Any input is more than appreciated.